Bridge, structure that spans horizontally between supports, whose function is to carry vertical loads. The prototypical bridge is quite simple—two supports holding up a beam—yet the engineering problems that must be overcome even in this simple form are inherent in every bridge: the supports must be strong enough to hold the structure up, and the span between supports must be strong enough to carry the loads. Spans are generally made as short as possible; long spans are justified where good foundations are limited—for example, over estuaries with deep water.
Seto Great Bridge
All major bridges are built with the public’s money. Therefore, bridge design that best serves the public interest has a threefold goal: to be as efficient, as economical, and as elegant as is safely possible. Efficiency is a scientific principle that puts a value on reducing materials while increasing performance. Economy is a social principle that puts value on reducing the costs of construction and maintenance while retaining efficiency. Finally, elegance is a symbolic or visual principle that puts value on the personal expression of the designer without compromising performance or economy. There is little disagreement over what constitutes efficiency and economy, but the definition of elegance has always been controversial.
Modern designers have written about elegance or aesthetics since the early 19th century, beginning with the Scottish engineer Thomas Telford. Bridges ultimately belong to the general public, which is the final arbiter of this issue, but in general there are three positions taken by professionals. The first principle holds that the structure of a bridge is the province of the engineer and that beauty is fully achieved only by the addition of architecture. The second idea, arguing from the standpoint of pure engineering, insists that bridges making the most efficient possible use of materials are by definition beautiful. The third case holds that architecture is not needed but that engineers must think about how to make the structure beautiful. This last principle recognizes the fact that engineers have many possible choices of roughly equal efficiency and economy and can therefore express their own aesthetic ideas without adding significantly to materials or cost.
Thomas Telford’s suspension bridge across the River Conwy, leading to Conwy Castle, Conwy county borough, Wales.
Generally speaking, bridges can be divided into two categories: standard overpass bridges or unique-design bridges over rivers, chasms, or estuaries. This article describes features common to both types, but it concentrates on the unique bridges because of their greater technical, economic, and aesthetic interest.
The Elements Of Bridge Design
Basic forms
There are six basic bridge forms: the beam, the truss, the arch, the suspension, the cantilever, and the cable-stay.
bridge formsSix basic bridge forms.
Beam
The beam bridge is the most common bridge form. A beam carries vertical loads by bending. As the beam bridge bends, it undergoes horizontal compression on the top. At the same time, the bottom of the beam is subjected to horizontal tension. The supports carry the loads from the beam by compression vertically to the foundations.
A beam bridge, with forces of tension represented by red lines and forces of compression by green lines.
When a bridge is made up of beams spanning between only two supports, it is called a simply supported beam bridge. If two or more beams are joined rigidly together over supports, the bridge becomes continuous.
